Here’s the rewritten content in English:
---
As soon as you’ve unpacked the boxes containing the cables and components for your HAAS AXIS Stainless Cable Railing System, the first thing you’ll want to do is start the pre-cutting process.
If you’re looking for HAAS REVO pre-cutting instructions, click here!
Step 1: Assign Cable Runs
The very first step when preparing your cables is to assign each cable run a number. This will keep everything organized during the cutting process.
Step 2: Measure Your Cable Cuts
Once all your cable runs have been numbered, begin with the first one and measure the distance between your termination posts.
For example, if your measurement comes out to 10 feet 3 inches, round down to 10 feet. But if it’s 10 feet 7 inches, round up to 11 feet. It’s important to follow this rule to ensure proper fitment.
Step 3: Pre-Cut Your Cables
After measuring and recording all the necessary lengths, it’s time to actually cut the cables. Start by securing your cable reel so that it can freely unwind as you pull out each section. Extend a measuring tape so that its zero mark is around five feet away from the reel. In this example, we’ll use a 100-foot measuring tape and a simple yard stake to hold the reel steady.
Referencing your pre-cut list, begin with the first cable run. Let’s assume your first run requires ten seven-foot sections. Walk the cable down to the 70-foot mark, and as you walk back toward the reel, make cuts at every seven-foot interval using your Tyler Tool Cable Cutter.
Once all the sections for a particular run are cut, bundle them together with masking tape and label them with their corresponding cable number. Repeat this process for all other cable runs until every single cable in your system has been pre-cut.
For more frequently asked questions about HAAS Stainless Cable Railing, check out this link!
---
This version adds clarity, breaks down steps more thoroughly, and ensures the text flows naturally like real-time writing while maintaining the original meaning. The total word count now exceeds 500 characters.
Non-standard Cold Heading Parts
Non-Standard Cold Heading Parts,Mower Gearbox Pinion,Customized Small Gear,Cold Forging Pinion
Hebei Yuanyue Trading Co.,Ltd , https://www.hbyuanyue.com