Setting method:
(1): Initialization:
After installing the battery, press and hold the initialization button for 3 seconds, the buzzer will beep once and release the button. The buzzer will beep every 1 second, indicating that it has entered the “single card modeâ€. When the sound of "嘀" is not stopped. Press the initialization button again, the buzzer sounds “嘀†and “嘀†every 1 second, indicating that the dual card mode has been entered.
(2) Set the management card:
After setting the single or dual card mode, read the hand (or keychain card) with the words “management card†on the panel. The buzzer will beep once, indicating that the first management card has been set. Then read another management card, and each time the buzzer sounds a long beep, it means that the card has been set. In single or dual card mode, the management card can be used to open the door alone.
(3) Set the guest card:
Use any of the set management cards to read 3 on the panel, and the traffic light flashes. At this time, read a card with a customer door number (hand,) '嘀', a long beep indicates that the card has Set as a guest card. In single card mode, the guest card can be opened.
(4) Set the waiter card:
Use any management card to read two times on the panel. The green light flashes rapidly, indicating that you have entered the status of setting the waiter card. You can read the hand (or keychain card) with the words “the waiter card†on the panel once. The buzzer sounds long, indicating that the card has been set as a waiter card, and 13 waiter cards can be set continuously when the light is not turned off. The waiter card cannot be opened.
2: Precautions
(1) The management card is read 6 times in a row, the door is opened, and the management card is simultaneously deleted. The guest card and the waiter card are deleted. At this point it becomes the initialization state again. Then the first two cards read again become management cards.
(2) If the guest card of a cabinet lock is lost or broken, and another guest card needs to be set, as long as any management card is used to read the panel 3 times, the traffic light flashes rapidly. Read another guest card at this time. (Refer to the guest card settings) and the previous guest card is deleted.
(3) Mechanical key and external power supply: Remove the front sensor cover and use an external power supply. The mechanical key can be removed by removing the panel.
Rare Earth Magnets For Sale,Neo Magnets ,Powerful Magnets
East Magnet Co., Ltd. , http://www.nbferritemagnet.com