First, according to the scheduled electrical equipment inspection and maintenance procedures, it is necessary to completely disconnect and remove all electrical wiring before any work begins. This ensures that no live circuits are present during the process.
Second, when the department is powered off, if there is an electrician nearby who is less than 0.9 meters away from the inspection staff, a reliable temporary cover made of dry wood, rubber, or insulating material should be used to prevent accidental contact with live parts.
Third, if the conductive part of the tile press is found to be grounded, no one should approach the area until the power supply is disconnected. All personnel must stay at least 4 meters away from the affected area and keep a distance of 1.8 meters from the room to avoid the risk of step voltage.
Fourth, during the repair of the tile press equipment, all switches and circuit breakers must be turned off, and a "Do Not Close – Work in Progress" warning sign should be hung on them. On live equipment and restricted aisles, "Stop – High Voltage" signs should be placed, and a "Person Working Here" sign should be displayed at the work location to alert others.
Fifth, electricians must have a thorough understanding of the types of electrical wiring and equipment in the workshop, as well as their functions. If they are not fully familiar with the equipment, they are strictly prohibited from performing any work without proper guidance.
Sixth, electricians should perform daily inspections of key components such as cables, motors, and electrical panels. Any issues discovered during these checks should be addressed immediately. When checking the temperature of a motor, always confirm that there is no electricity present first, and then test it using the back of the hand for safety.
Seventh, except for temporary construction-related electrical use, the installation of temporary wiring is not permitted. Additionally, it is not allowed to hang lights, tools, or welding machines on safety switches or sockets. Unauthorized changes to the original electrical system are strictly prohibited.
Eighth, all equipment must be properly connected to a safety ground to prevent electrical shocks and ensure safe operation.
The current pressure tile machine provides comprehensive technical support to ensure safe and efficient operations. These guidelines are essential for maintaining a secure working environment and preventing electrical accidents.
Simple installation, different lamps can be equipped, and the number of lamps can be increased or decreased freely. When there is no limit to the number of lamps installed on the track, it can theoretically not exceed the wattage of the transformer power supply.
Magnetic Track Light,Magnetic Spotlight,Magnetic Light,Magnetic Down Light
JINGYING , https://www.jingyinglight.com