First, according to the scheduled electrical equipment inspection and maintenance procedures, all electrical lines must be completely disconnected before any work begins. This ensures a safe working environment and prevents accidental power supply during maintenance.
Second, when the department is experiencing a power outage, if there is an electrician nearby who is less than 0.9 meters away from the inspector, a reliable temporary cover made of dry wood, rubber, or insulating material should be used to protect the workers from potential electrical hazards.
Third, if the conductive part of the tile press is found to be grounded, no one should approach it before the power supply is cut off. All personnel should immediately move at least 4 meters away from the area and stay 1.8 meters away from the room to avoid injury from step voltage.
Fourth, during the repair of the tile press equipment, all switches and circuit breakers must be turned off, and warning signs stating "Do Not Close, Work in Progress" should be hung on them. On live equipment and restricted aisles, "Stop, High Voltage" signs should be displayed, and a "Person Is Working Here" sign should be placed at the work site to alert others.
Fifth, electricians must have a thorough understanding of the types of wiring and electrical equipment in the workshop, as well as their functions. If they are not fully familiar with the equipment, they are strictly prohibited from performing any risky operations.
Sixth, electricians should conduct daily inspections of cables, motors, and electrical control panels. Any issues discovered during these checks should be addressed immediately. When checking the temperature of a motor, ensure that it is de-energized first, and then test it using the back of the hand for safety.
Seventh, except for temporary construction needs, the use of temporary electrical wiring is not allowed. Additionally, safety switches and sockets should not be used to hang lights, tools, or welding machines. Any unauthorized changes to the original electrical circuits are strictly prohibited.
Eighth, all equipment must be properly connected to a safety ground to prevent electrical shocks and ensure overall system stability.
These procedures are essential for maintaining a safe and efficient working environment in the workshop. The current pressure tile machine relies on these technical guidelines to operate safely and effectively.
Wall washing lamp, as the name implies, lets the light wash the wall like water to outline the outline of large buildings.
LED is widely used because of its energy-saving, high luminous efficiency, rich colors, long life and other characteristics.
Wash Wall Light,Wash Wall Lamp,wall washer light, outdoor wash wall light
JINGYING , https://www.jingyinglight.com