Toilets are everywhere in life, and toilets have developed from the United Kingdom. A few hundred years ago the United Kingdom enacted a decree to build new homes and houses where toilets, flush toilets, and garbage were needed. The resulting toilet bowl provided room for development and evolution. The following small series introduces toilet flush toilet installation standards and toilet flush toilet working principle.
Toilet flush toilet installation standard
1, determine the installation position, and drilling in the ground
Align the floor drains and the drain outlets at the bottom of the toilet, install the outer dimensions of the toilet toilet base, draw the position of the toilet fixing holes on the floor, and then drill holes. The depth of the holes is about 5 cm.
2, install the toilet seat
Put the expansion screw into the hole in the ground, place the expansion bolt on the bottom corner of the toilet and tighten the nut to place the toilet in place, and the drainage outlet of the toilet and the drainage pipe preset on the ground should be tightly sealed.
3, install the water tank
In accordance with the height of the tank and the hole in the back wall of the tank, fix the position on the wall, then install the tank, insert the expansion bolt into the hole of the rear wall, add a 3 mm thick nylon washer, and then tighten the nut.
4. Install floats and other accessories in the water tank.
5. Adjust the floating height of the float according to the height of the water in the tank, and adjust the tightness of the control screw according to the spray size of the spray valve.
6. Fill the water tank with water, and then check the toilet discharge capacity, and whether there is no water leakage at the joints of the pipes.
7. Use silicone to seal the gap between the toilet seat and the floor. Do not use cement paste as a sealing material.
8, finally install the toilet seat and toilet cover.
Toilet flush toilet working principle
The working principle of the toilet flush toilet is based on the components of the toilet. After pressing the waterproof button on the water tank, the water plug is pulled up through the lever so that the water in the water tank will flow out. After the water in the water tank is full, The outlet plug will automatically fall, so that the outlet can be blocked, and then the float will pull the water plug because the water in the tank drops, so that the water can enter the tank.
Editor's summary: Regarding the toilet flushing toilet installation standard and the working principle of the toilet flush toilet, it is introduced here and I hope to be helpful to everyone. Want to learn more related knowledge can focus on this site information.
What makes a good toilet flush toilet leak how to repair the toilet flush toilet
Transparent Disposable Glove,Pvc Disposable Gloves,Medical Disposable Gloves,Food Grade Disposable Glove
GULF STAR MEDICAL MANUFACTURING FZE , https://www.gulfstarmedical.com