How to use and maintain the hardware lock

Is your home's lock maintained? How do you use the hardware lock? We learn to maintain the lock to extend its life!

First, it guarantees long-term lubrication of the body of the lock body, or a large inspection after six months to ensure tightening and prolong life.

Secondly, when using the lock head, when an abnormality is found, we can sprinkle a small amount of graphite powder or pencil powder inside the lock cylinder groove to make it easy to insert and remove the key. Safe open.

Third, long-term and long-term check of the clearance between the lock body and the lock plate, the height of the lock tongue and the lock plate hole is suitable. To ensure that the clearance between the door and the door frame, the lock body and the lock plate is reasonable, to ensure the smooth use of the lock.

There are two points in the appearance and maintenance of the locks. First of all, during the renovation of the house, do not seal the exposed surfaces of the lock handles and panels with the adhesive surface that comes with the adhesive tape and the surface of the lock to avoid the surface treatment layer of the lock components from being affected. Corrosion caused by acidic or alkaline materials and gases during decoration leads to specks, and the appearance of blisters and even delaminations leads to poor appearance. Long-term surface wax spray grows spots. Second, in the normal use of the process, if it is dirty, clean it directly with a cloth. Do not let it fade, and use a damp cloth to wipe the lock body and handle, because some metal locks will rust; alloy locks will wear off the coating, so that it affects the original appearance.