Aluminum/Aluminium Extrusion Profiles for Tents,

1. Description: Aluminum/Aluminium extrusion profiles for tent
2. Alloy temper: 6061/6063-T6/T5;
3. Standard: EN755, ASTMB221, DIN Standard
4. Surface treatment: Mill finishes; anodized; Powder coated, wooden grain, polished, brushed.
5. Application: Construction; window; door; decoration; Architecture and etc.
6. Advantage:
 1) Pure 99.7% aluminum materials without any scrap used
            2) OEM welcome, we can design and cut die to meet customer's special demand
            3) Wonderful surface treatment, we can meet customers required on surface
            4) Strictly quality control process assured higher quality.
            5) Packing safety and convenient. PRODUCTION LINE

PRODUCTS

PROFESSIONAL LOADING

CUSTOMERS VISITING

MAIN CUSTOMERS



FAQ For Saving Your Precious Time!
 
Q1: What's the thickness for anodizing film? Can you do 15um?
A: Our normal thickness is over 10 um. Yes, we can do 15um and above.
 
Q2: What color you can do for powder coating?
The thickness for powder coating film?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-100um.
 
Q3: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
 
Q4: How's the weather resistance for wood grain finish D1010?
A: (1). Powder: Akzo Noble Interpon D1010.
(2). Wood grain film: Italian Menphis.
(3). Standard complied: American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather: 10 years color guarantee.
 
Q5: What certification do you have? What's your standard?
A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.
 
Q6: What's the delivery time for samples and mass production?
A: (1). 2 weeks to open the new moulds and make free samples.
(2). 2-3 weeks after receipt of deposit and confirmation of the order.
 
Q7: Can you do deep processing and fabrication?
A: Yes, we have deep processing line in our factory, we can do cutting, drilling, punching, welding and deep fabrication.

Q8: Can you provide special export packing and loading?
A:  Yes, we can follow end customers required for special packing and loading, and we have experienced engineer team to design and improve your idea.

Q9: What's your Quality Control Plan?
A: We have strictly 5S quality control plan in our factory, 1S is Incoming materials quality control, 2S is Production line quality control, 3S is Packing quality control, 4S Warehouse quality control and 5S loading quality control plan. We can avoid the Inferior quality issues our factory.

 

 Alnico is an alloy containing Aluminium (Al), Nickel (Ni), Cobalt (Co) hence its name Alnico. But Alnico actually contains more than just these three elements. It also contains Iron and Copper with some versions also containing Titanium and even Niobium (the Titanium versions were sometimes called Ticonal, derived from the elements TiCoNiAl). Alnico magnets were developed in the 1930`s and were the first [Real" performance Permanent Magnets (the first [magnets", called magnetic steels, were quickly replaced by the vastly superior Alnico).

Alnico is produced by either a sintering method or, more commonly, a casting method. The as cast or as sintered shape is acceptable for many applications but surfaces may need to be ground for a smoother surface finish. The as cast look has darkened edges with a slightly rough texture (due to the sand mold edges); a machined face of an Alnico Magnet has a bright silvery metallic surface and is usually extremely smooth as it is often precision ground.    

Until about 1975, Alnico Magnets were the most widely used magnets in the world. The last 35 years have seen a sharp decline in the demand for them mainly because of the soaring prices of Cobalt and the availability of high coercivity materials like Ferrites and Rare Earths, the former being also the cheapest. And yet, Alnicos still play an important role in many applications because of their vastly superior ability to withstand high temperatures (up to 550°C) and a very low temperature co-efficient (less than 0.02% per degree C) as compared to Ferrite and Rare Earth magnets.

Worldwide, Alnicos are produced in several grades, some isotropic (unoriented) and the others anisotropic (oriented). Of these, we produce Alnico-5 and Alnico-6 which are the most popular anisotropic grades and Alnico-3 which is isotropic and primarily used for Speedometer Magnets. We also produce Alnico-8 (isotropic), which is primarily used in powder form for making bonded magnets.

Cast AlNiCo Magnet

Ningbo Hegao Magnetic Technology Co.,Ltd , http://www.allmagnetstores.com